e-mobility

Switch on to an electric future

The future is electric, and we’re developing coatings that support the innovators of next generation technologies used to power the world’s most advanced electrical vehicles (EVs).

Resicoat and Interpon powder coatings are tried and tested over more than 50 years. It is this past experience, the assurance of various Underwriter Laboratories (UL) approvals, and our current technical expertise that is now paving the way for future standards.

Our coatings can be applied to all parts of an electric vehicle and not just to enhance and protect its body. They will also be found on the battery systems, electric motors and electrical storage units. They provide superior electrical insulation and thermal management to help power the next generation and allow electrical components to perform in the most challenging environments.

Discuss your requirements with our expert team

Resicoat EVpack

Insulating the electrical systems to keep the battery safe and performing at its best

Our Resicoat EVpack powder coatings are designed to protect the battery pack/housing. They insulate the electrical systems to help prevent the battery from becoming too hot. This keeps the battery safe and performing for longer. They also protect against corrosion, and the damage caused by chemicals and liquids like petrol, oil, and hydraulic fluid.

Discuss your requirements with our expert team

Resicoat EVcell

Outstanding cell-to-cell electrical insulation and high dielectric strength

Our Resicoat EVcell powder coatings provide outstanding cell-to-cell electrical insulation. They are especially good at protecting difficult designs, including cylindrical and prismatic cell surfaces. They also have high dielectric strength and extraordinary adhesion characteristics, as well as being capable of resisting thermal shocks.

Discuss your requirements with our expert team

Resicoat EVcooling

Great performance in thermal conductivity in cooling tube and cooling plate applications

Our Resicoat EVcooling powder coatings are designed to deliver the best performance in thermal conductivity and electrical insulation in cooling tube/plate applications used by electric vehicles (EVs) and hybrid vehicles. This helps keep the battery safe and performing at its best. They also provide resistance against corrosion and are tested and approved to UL 94, vertical burn test V-0 and UL 746B temperature index of 130°C (Class B).

Discuss your requirements with our expert team

Resicoat EVbusbar

Protecting busbars to perform more safely for longer

Resicoat EVbusbar powder coatings coat the busbars to enable the safe and effective distribution of electricity around an Electric Vehicle. Different grades are available to suit almost all busbar applications, from silver-plated to plain copper. They conform to UL 1446 Class F, UL 94 (V-0) and UL 746B Class B. Solutions for High Voltage (HV) connector systems are also available.

Discuss your requirements with our expert team

Resicoat EVmotor

Epoxy powder solutions that are specifically designed for the electrical insulation of hairpin stators

The Resicoat EVmotor range includes epoxy powder coatings that are specifically designed for the electrical insulation of hairpin stators. They provide outstanding resistance against heat, chemicals and moisture, as well as corrosion. For slot insulation the powder coatings deliver the edge coverage, flow, and gel time needed to maintain the air gap to prevent any arcing or current breakthrough. Special Resicoat EV grades are recognized by UL 1446 Class F and Class H.

Discuss your requirements with our expert team

Interpon A6000 range

Powder coatings that support the ultra-light automotive platforms of the future

Interpon A6000 powder coatings provide vehicles and their components with exceptional resistance to thermal shocks. They have reliable adhesion, and high dielectric strength. Available in a wide range of colors, textures and finishes, they are also free from VOCs. This means you can meet the most demanding requirements for style and sustainability.

Discuss your requirements with our expert team

    Iscriviti alla nostra newsletter!

    Compila il seguente modulo per iscriverti alla nostra newsletter e ricevere via e-mail tutti gli aggiornamenti e le novità su eventi, prodotti e servizi. Inserisci qui sotto i tuoi dati.

    Possiamo elaborare le vostre informazioni in conformità con le nostre condizioni per fornirvi quanto richiesto. È possibile annullare l'iscrizione in qualsiasi momento cliccando sul link di annullamento dell'iscrizione in fondo alle nostre e-mail.