Our coatings can be applied to all parts of an electric vehicle and not just to enhance and protect its body. They will also be found on the battery systems, electric motors and electrical storage units. They provide superior electrical insulation and thermal management to help power the next generation and allow electrical components to perform in the most challenging environments.
Our Resicoat EVpack powder coatings are designed to protect the battery pack/housing. They insulate the electrical systems to help prevent the battery from becoming too hot. This keeps the battery safe and performing for longer. They also protect against corrosion, and the damage caused by chemicals and liquids like petrol, oil, and hydraulic fluid.
Our Resicoat EVcell powder coatings provide outstanding cell-to-cell electrical insulation. They are especially good at protecting difficult designs, including cylindrical and prismatic cell surfaces. They also have high dielectric strength and extraordinary adhesion characteristics, as well as being capable of resisting thermal shocks.
Our Resicoat EVcooling powder coatings are designed to deliver the best performance in thermal conductivity and electrical insulation in cooling tube/plate applications used by electric vehicles (EVs) and hybrid vehicles. This helps keep the battery safe and performing at its best. They also provide resistance against corrosion and are tested and approved to UL 94, vertical burn test V-0 and UL 746B temperature index of 130°C (Class B).
Resicoat EVbusbar powder coatings coat the busbars to enable the safe and effective distribution of electricity around an Electric Vehicle. Different grades are available to suit almost all busbar applications, from silver-plated to plain copper. They conform to UL 1446 Class F, UL 94 (V-0) and UL 746B Class B. Solutions for High Voltage (HV) connector systems are also available.
The Resicoat EVmotor range includes epoxy powder coatings that are specifically designed for the electrical insulation of hairpin stators. They provide outstanding resistance against heat, chemicals and moisture, as well as corrosion. For slot insulation the powder coatings deliver the edge coverage, flow, and gel time needed to maintain the air gap to prevent any arcing or current breakthrough. Special Resicoat EV grades are recognized by UL 1446 Class F and Class H.
Interpon A6000 powder coatings provide vehicles and their components with exceptional resistance to thermal shocks. They have reliable adhesion, and high dielectric strength. Available in a wide range of colors, textures and finishes, they are also free from VOCs. This means you can meet the most demanding requirements for style and sustainability.